Proxxon Precision Tools

Home > Proxxon Tools > Proxxon Precision Tools

Proxxon EL 12 Soldering Iron

Quantity:

£12.50 £15.00

Heating time approx. 10 seconds
On/off switch, lockable in the "on" position
PTC technology ensures exact tip temperature of 310°C
Light for illuminating working area
Complete with spiral cable and standard MICROMOT jack plug
Requires <</strong>>!!

Heating time approx. 10 seconds, with ready access to on/off switch, lockable in the "on" position. PTC technology ensures exact tip temperature of 310°C, preventing damage to sensitive electronic components such as transistors and ICs, while minimising the possibility of generating noxious gases from the solder/flux. Light for illuminating working area. Complete with spiral cable and standard Micromot Jack plug. Requires Proxxon Micromot Mains Adaptor.

More details on the Proxxon EL 12 Soldering Iron

Proxxon MK 240 MICRO-Compressor with Air Brush

Quantity:

£110.00 £132.00

Light, small and quiet
Supplied with AB 100 airbrush and two paint containers

The set is light, small and quiet. With adaptor and 200cm hose to connect to the Proxxon AB 100 air brush, it is also supplied with two paint containers. The single action airbrush AB 100 is ideal for the beginner. Plastic hand piece with adjustable nozzle. N.B. This compressor is suitable for airbrush purposes only.

Capacity 12 litres / minute
Max Pressure 29psi
Model MK240
Nett Weight 1.3kg
Noise Level 70dB
Overall L x W x H 140 x 120 x 95mm
Power 85W

More details on the Proxxon MK 240 MICRO-Compressor with Air Brush

Proxxon Micro Cutter MIC

Quantity:

£53.00 £63.60

A powerful DC special motor in this compact device ensures an astonishingly high cutting performance when cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foil and similar materials. Slim and light: A diameter of just 36mm makes the ergonomically shaped casing easy to handle and unrivalled for fatigue-proof work and accurate guiding.

Important:
The MIC makes it possible to "dip in" to the work piece surface (e.g. for cut-outs). The saw blade guard folds up automatically during cutting.

Technical data:
220 - 240V. 30W. 15,000/min. Maximum cutting depth 4mm. Cutting width 0.5mm. Weight approx. 300g. Class 2 insulation.

More details on the Proxxon Micro Cutter MIC

Proxxon HKP 220 Hot Melt Glue Gun

Quantity:

£10.80 £12.96

Glues quickly & efficiently
Metal, wood, plastic, Ceramics, glass, Cardboard & leather

Depending on the material and on the adhesive quantity applied, the adhesive sets after about 30 seconds, allowing positional corrections within this period of time (impossible with instant glues). The 7mm glue sticks are perfect for delicate work such as model build-ing, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery. Integral stand positions gun on worktop when not in use. Short heating time.

Technical data:
220 - 240V.
PTC controlled element for exact temperature of 200ºC.
Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set.
The three Nozzles are
Round - 1.84 mm ID
Round - 1.93 mm ID
Flat - 5.61mm wide x 1.05 Opening

More details on the Proxxon HKP 220 Hot Melt Glue Gun

Proxxon MFB/E MICROFLAME Burner

Quantity:

£34.00 £40.80

Super fine flame shape.
Rechargeable with standard lighter fuel.
Used for soldering, de-soldering or brazing etc.
Ideal for model building, electronics, jewellery repairs, dental laboratories, Tiffany.
Independent air and fuel adjustments.
Super fine flame shape with temperature attaining
Fitted with piezo lighter
120 min run time on a full charge.
Includes removable stand

Super fine flame shape. Rechargeable with standard lighter fuel. Used for soldering, de-soldering, brazing or heating of workpieces. Ideal for model building, electronics, jewellery repairs, dental laboratories, Tiffany. Independent air and fuel adjustments. Super fine flame shape with temperature attaining 1,300°C, using butane cartridge, rechargeable with standard lighter fuel. Fitted with piezo lighter and 500ml cartridge yielding typical usage of 120 minutes. Includes removable foot which ensures stability on the worktop.

More details on the Proxxon MFB/E MICROFLAME Burner

Proxxon BV 2000 Drilling Device

Quantity:

£164.58 £197.50

Preselectable drill depth using depth control with easily readable scale
Articulated arm pivoted in two locations
Flat-milled, solid base plate
200 x 200mm usable table area and 2 continuous T-slots
20mm system fit for precise clamping of drilling device

A precise device for parallel drilling, thread-cutting and milling. Made in high-precision aluminium diecasting. With articulated arm pivoted in two locations. The device can be guided both sideways and vertically across the whole working area very precisely once clamped. It always remains vertically aligned. This means that any drill holes made are always precisely square to the workpiece surface!With 20mm system fit for precise clamping of drilling devices such as Precision Drill/Grinder FBS 240/E. Professional Drill/Grinder IB/E, Longneck Straight Drill/Grinder LB/E, MICROMOT 50, 50/E and 50/EF.An adjustable spring automatically pulls the device back into its top rest position after drilling. Preselectable drill depth using depth control with easily readable scale.Flat-milled, solid base plate with 200 x 200 mm usable table area and 2 continuous T-slots. Stable drill column (45mm diameter, 500mm long). Weight approx. 6kg. (Note: Professional drill/grinder IB/E and step clamps are not included in the package).