Proxxon 12 Volt Power Tools

Home > Proxxon Tools > Proxxon 12 Volt Power Tools

Proxxon AP 12 Universal Oil Pump 12V DC

Quantity:

£45.96 £55.15

* Perform an oil change in just 2-3 minutes
* Pumps, motor, diesel and heating oil effortlessly
* 250litres an hour (fitted with a 1/2" feed hose)
* Pumps the oil out of an engine via the dipstick shaft
* Includes a 6mm diameter dip wand
* Crocodile clips fitted suitable for connection to a car battery
* 130 x 90 x 90mm, weight 1.4kg

This small neat unit is will help you perform an oil change in just 2-3 minutes.This pump transfers, motor, diesel and heating oil effortlessly at a rate of 250 litres an hour (fitted with a 1/2" feed hose). You can pump the oil out of an engine via the dipstick shaft in which case the flow rate is 3 litres per minute at 40°C oil temperature. The unit includes a 6mm diameter by 800mm long dip wand for this purpose. The crocodile clips fitted to the 12 Volt DC feed cables are suitable for connection to a car’s battery. The feed and supply sides have 1/2" connectors. An outlet hose of approximately 1,500mm is also included. The housing is made of glass fibre reinforced polyamide; approx 130 x 90 x 90mm.

More details on the Proxxon AP 12 Universal Oil Pump 12V DC

Proxxon PS 13 Pensander 12V

Quantity:

£22.00 £26.40

The PS 13 Pensander from Proxxon is a great tool for the model maker and miniaturist. It is ideal for working on surfaces in recesses, slots and other awkward to get at areas. The durable special DC motor is housed in a glass fibre reinforced polyamide casing and the unit features a sanding stroke with a linear action, not rotational. Supplied with four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self adhesive sanding pads. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.N.B. A mains adaptor of at least 1.0A at 10-18VDC is required. We recommend Proxxon power supplies NG2/E or NG5/E.

More details on the Proxxon PS 13 Pensander 12V

Proxxon FBS 12/E Precision Drill/Grinder 12V

Quantity:

£33.96 £40.75

* Precision tool for delicate or small jobs
* Keyless chuck (capacity 0.3 - 3.2 mm)
* Spindle lock for easy bit changing
* Recessed spindle head for inserting: MlCROMOT collets
* High quality 12 - 18V, 5 pole motor
* Fibreglass reinforced POLYAMIDE casing
* For use with MICROMOT transformers of at least 2.0A

A great precision tool for delicate or small jobs which you can't do with a standard drill: e.g. precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving and cutting. Includes keyless chuck (capacity 0.3 - 3.2 mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need for spanners. Recessed spindle head for inserting: MlCROMOT steel collets. Efficient forced ventilation cooling of motor (and electronic components in "E" model). High quality 12 - 18 Volt, 5 pole motor with variable speed 3,000 to 15,000rpm. Fibreglass reinforced POLYAMIDE casing. For use with MICROMOT transformers of at least 2.0A.

More details on the Proxxon FBS 12/E Precision Drill/Grinder 12V

Proxxon STS 12/E Jigsaw 12V

Quantity:

£38.00 £45.60

Ideal for curved cuts in wood (up to 10mm), corrugated boards (up to 3mm) and non-ferrous metals (up to 2.5mm). Equipped with a powerful 12 - 18 Volt five-pole motor. Power consumption 100W, max. 6mm stroke. The number of strokes may be adjusted between 2,000 and 5,000 per minute. Stable housing of fibreglass reinforced POLYAMIDE. Includes two saw blades (coarse and fine). We recommend MICROMOT mains adaptor from 2.0A for powering the jigsaw.

* Powerful 5-pole motor operates
* 6mm stroke
* Variable speed 2,000 to 5,000/min.
* Supplied with two blades 1 coarse & 1 fine.
* Requires a MICROMOT adaptor of a least 2.0 A

More details on the Proxxon STS 12/E Jigsaw 12V

Proxxon MICROMOT 50 Drill/Grinder 12V

Quantity:

£25.11 £30.13

A single speed machine 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approx. 230g. The body diameter of only 35 mm makes it easy to handle. The weight of 230g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. 12V MICROMOT transformers of at least 1A are recommended.

* Slim, easily handled & light weight (230g)
* Quick-action chuck
* 20,000rpm
* Special balanced, low noise DC motor
* 12V MICROMOT transformers of at least 1A are recommended

More details on the Proxxon MICROMOT 50 Drill/Grinder 12V

Proxxon MICROMOT 50/E Drill/Grinder 12V

Quantity:

£28.00 £33.60

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approx. 230g.The body diameter of only 35 mm makes it easy to handle. The weight of 230g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

* Slim, easily handled & light weight (230g)
* Quick-action chuck
* Variable speed with feedback
* Special balanced, low noise DC motor
* MICROMOT 12V transformers of at least 1A are recommended

More details on the Proxxon MICROMOT 50/E Drill/Grinder 12V

Proxxon MIS 1 Micro Screwdriver

Quantity:

£55.84 £67.01

This micro screwdriver from Proxxon is light and easy to handle, and the well positioned rocker switch provides on/off/reverse. The quality ROHM three jaw chuck accepts bit shanks of up to 6.5mm. The torque range is in six stages from 0.35-2.0 Nm. Supplied complete with the following 16 insert bits of chrome molybdenum steel. Slot: 0.3 x 1.5 / 0.35 x 2.0 / 0.4x 2.5mm. Philips: sizes 0 and 1 Torx: T6, T8, and T10. Hex key internal: 3.0 / 3.5 / 4.0 / 4.5 / 5.0mm. External: 1.5 / 2.0 / and 5.0mm.N.B. This unit can also be used for small thread cutting with suitable taps.We recommend the use of a MICROMOT mains adaptor of at least 2.0A.

More details on the Proxxon MIS 1 Micro Screwdriver

Proxxon MICROMOT NG 5/E Mains Adaptor

Quantity:

£44.17 £53.00

Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for Micromot machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates 'ready'. PTC (Positive-Temperature-Coefficient) element prevents overload (and plugged-in tool will not restart automatically). After cooling down, the mains plug should briefly be unplugged to reset the adaptor. With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the Micromot tool.

Input Voltage: 240V
Model: NG 5/E
Output Voltage: 12V

More details on the Proxxon MICROMOT NG 5/E Mains Adaptor

Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V

Quantity:

£21.92 £26.30

MICROMOT mains adapter NG 2/E. NORYL casing (heat resistant - a necessity for transformer enclosures). Polarised socket for MICROMOT plug. Red LCD indicates readiness for use. PTC (Positive Temperature Coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter. With holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready. Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

Technical data:
220 - 240V.
Supplies 2.0A at 16V open circuit and 12V under load.
Weight 1,000g.
Insulated to class 2 requirements.

More details on the Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V

Home > Proxxon Tools > Proxxon 12 Volt Power Tools